Organizer and Sponsor ........................................... v
Committees ..................................................... vi
Preface ........................................................ ix
A. Photocatalyst
Nano-Sized Nitrogen-Doped Ti-W Mixed Oxides: Preparation and
Enhanced Photocatalytic Activities under Visible Light
Irradiation
Y.F. Shen, T.Y. Xiong, J.K. Shang and K. Yang ................ 1
Treatment Performance of Photocatalysis/H2O2/Metal Membrane
Process for Organics Removal
J.T. Jung, J.O. Kim and W.Y. Choi ............................ 5
Test Method for Skin Damage of Titania Photocatalyst
Nanoparticles In Vitro
E. Watanabe, M. Fukaya, K. Nishizawa, T. Miki and H. Taoda ... 9
Surface Roughness Control of Zirconia Films Using a Novel
Photoresponsive Precursor Molecule for Improving its
Photocatalytic Activity
K. Nishizawa, T. Miki, E. Watanabe and H. Taoda ............. 13
Influence of Calcination Temperature on the Microstructure of
Porous ТiO2 Film
T. Miki, K. Nishizawa, E. Watanabe and H. Taoda ............. 17
Nanocrystalline ТiO2 Coated-Fabric for UV Shielding and
Anti-Bacterial Functions
O.U. Nimittrakoolchai and S. Supothina ...................... 21
Preparation of Ultrafine ТiO2 Nanofibers and their Application
in Removal of NOx in Air
K. Juengsuwattananon, P.O. Rujitanaroj, P. Supaphol,
N. Pimpha and S. Matsuzawa .................................. 25
Performance of Photocatalysis/Chemical Oxidants in Aqueous
ТiO2 Suspensions
J.T. Jung, J.O. Kim and J.Y. Choi ........................... 29
Removal of Refractory Organic Compounds Using Peroxy Radical
and Ozone Reaction in Aqueous Solution
J.T. Jung, J.O. Kim, B.G. Kwon and D.H. Song ................ 33
Physicochemical Characteristics of ZnS Immobilized on
Spherical Activated Carbon for Removing HA(Humic Acid)
J.J. Lee, J.K. Suh, J.S. Hong, J.M. Lee and J.W. Park ....... 37
Characterization of Anodized ТiO2 for Hydrogen Evolution in
Enzymatic PEC System
J.K. Yoon, S.H. Bae, J.W. Ha and H.K. Joo ................... 41
B. Nano Structured Materials
Machinability and Microstructure of SiC/h-BN Nano-Composites
H.Y. Jin, G.J. Qiao, Z.R. Peng and J.Q. Gao ................. 45
Investigation on Gel Casting Preparation of Porous Si3N4
Ceramics through Orthogonal Experimental Design
J.L. Yu, H.J. Wang, H. Zeng, D.B. Lin and Z.H. Jin .......... 49
Investigation of Mechanical Property and Thermal Shock
Behavior of Machinable B4C/BN Ceramics Composites
T. Jiang, H.Y. Jin, Z.H. Jin, J.F. Yang and G.J. Qiao ....... 53
High Temperature Oxidation of WC-CrN Superhard Nanocomposite
Film
H.S. Lee and D.B. Lee ....................................... 57
Synthesis of MgO Thin Film Deposited on Soda Lime Glass by
Sol-Gel Process
D.Y. Shin and K.N. Kim ...................................... 61
Study on the Recognition of the Registration Marks for
Low-Energy Microcolumn Lithography
S.J. Ahn, H.S. Kim, D.W. Kim and S.J. Ahn ................... 65
Properties of Nano-Hybrid Sol-Gel Coating Films Synthesized
with Colloidal Silica and Organoalkoxy Silanes
M.K. Na, H.Y. Park, D.P. Kang and M.S. Ahn .................. 69
Structural and Electrical Properties of Vanadium Tungsten
Oxide Thin Films Grown on Pt/TiO2/SiO2/Si Substrates
S.P. Nam, S.G. Lee and Y.H. Lee ............................. 73
Synthesis of Nickel Coated Gadolinia Doped Ceria Nanopowder
by Microwave Radiation
J.M. Lim and S.W. Kim ....................................... 77
Analysis of Cell Toxic Experiments in New Synthetic Compounds
from Nano-Scaled Collagen
J.H. KimandW.C. Choi ........................................ 81
Corrosion Resistance of TiAlN/ZrN and TiCrN/ZrN Multilayers
during Heat Treatment
D.H. Song, J.K. Lee, D.S. Seo and G.S. Yang ................. 85
Mechanical Performances of ZTM/SiC Nanocomposite Optimized
through Composition and Microstructure Tailoring
X.H. Jin, L. Gao and J. Sun ................................. 89
C. Hybrid Materials
Phase Analysis in the Region Brazed with
Ni-14Cr-10Co-3.5Al-2.5Ta-2.8B Filler Metal Using Electron
Backscatter Diffraction
Y.H. Kim and S.I. Kwun ...................................... 93
The Mechanical Properties of A1N/BN Laminated Ceramic
Composites
T. Zhang, H.Y. Jin, Y.I. Wang and Z.H. Jin .................. 97
Comparative Studies on Microstructure and Mechanical
Properties of CrN, Cr-Mo-N and Cr-Si-N Coatings
J.H. Yun, S.K. Ahn and K.H. Kim ............................ 101
Syntheses and Mechanical Properties of Ti-Al-Si-C-N Coatings
by a Hybrid Coating System
E.Y. Choi, J.H. Park and K.H. Kim .......................... 105
Pressureless Brazing of Zirconia to Stainless Steel Using
Active Filler Metal with TiH2 Powder
G.W. Liu, G.J. Qiao, H.J. Wang, J.F. Yang and T.J. Lu ...... 109
Investigation of Cu/Al Metal Laminates Prepared by Plasma
Activated Sintering (PAS)
Y.J. Guo, J.P. Lin, G.J. Qiao and H.Y. Jin ................. 113
Two-Step Planarization of ECMP and CMP for MEMS Copper
Patterns
S.H. Jeong, S.B. Joo, H.J. Lee, B.Y. Park, H.J. Kim and
H.D. Jeong ................................................. 117
Optimum Material Design of Metal-Ceramic Hybrid Functionally
Graded Composite
J.H. Choi and J.R. Cho ..................................... 121
Vacuum Breakdown Behavior of CuWCr Composites
P. Xiao and Z.K. Fan ....................................... 125
Experimental Analysis in Lithium Niobate CMP for Room
Temperature Bonding
H.C. Cho, S.H. Jeong, J.H. Park, H.J. Lee, J.H. Oh,
H.J. Kim and H.D. Jeong .................................... 129
The Effect of Mixed Abrasive Slurry on CMP of 6H-SiC
Substrate
H.J. Lee, B.Y. Park, H.S. Lee, S.H. Jeong, H.D. Seo,
S.B. Joo, H.D. Jeong and H.J. Kim .......................... 133
The Effects of Various Substrate Temperature of Вi2О3 Buffer
Layer on SBT (SrBi2Ta2O9) Thin Films Deposited
by R.F. Magnetron Sputtering
J.E. Yoon, W.H. Cha, D.H. Hwang, C.S. Lee, I.S. Lee and
Y.G. Son ................................................... 137
Oxidation Behavior and Cutting Performance between
Ti0.75-Al0.25-N and Ti0.69-Al0.23-Si0.08-N Coated Tool
through Measurement of Cutting Temperature
S.H. Shin, C. Kim, D.G. Ahn, K.H. Kim and M.C. Kang ........... 141
Stress-Induced Martensitic Transformation of Metastable
Ti-Nb-Ge Alloys for Biomedical Application
H.S. Kim and W.Y. Kim ...................................... 145
Dry Sliding Wear Characteristics of Ti-Nb-Si Alloys for
Biomedical Application
S.K. Kim, H.S. Kim and W.Y. Kim ............................ 149
Crystallization Kinetics for Synthesis Hyper-Structure in
P2O3-ZnO-B2O3-BaO-Аl2О3-ТiO2 Glass Ceramic Composite
Y.S. Kim, K.H. Lee, Т.Н. Kim, Y.J. Jung, S.H. Yim and
B.K. Ryu ................................................... 153
Optical Property of Hybrid Material Including Crystalline in
Amorphous Matrix
K.H. Lee, Y.S. Kim, Т.Н. Kim, Y.J. Jung, H.J. Chin and
B.K. Ryu ................................................... 157
The Preparation and Characterization of Organic Solvent
Dispersible Polyaniline Coated Titania Hybrid Nanocomposites
Y.G. Han, T. Kusunose andT. Sekino ......................... 161
The Adhesion Evaluation of Thin Hard Coatings on Tool Steel
with Nitride or Non-Nitride Layer Using the Scratch Test
C.J. Lee, J.M. Lee and B.M. Kim ............................ 165
The Electrical Properties of PLZT Thin Films on ITO Coated
Glass with Various Post-Annealing Temperature
W.H. Cha, J.E. Yoon, D.H. Hwang, CS. Lee, I.S. Lee and
Y.G. Son ................................................... 169
Mechanical Properties and Microstructure Observation with
Grain Refinement in CuZnAl Alloy
G.S. Yang, J.K. Lee and W.Y. Jang .......................... 173
Formation of ТiO2 Coating Layer on the Surface Treated Ti
Alloys
N.R. Ha, Z.X. Yang, K.H. Hwang and J.K. Lee ................ 177
Deposition of ISZO Films on Polymer Substrate Using Two
Cathodes
J.R. Lee, D.Y. Lee, D.G. Kim, G.H. Lee and P.K. Song ....... 181
Mechanical and Electrical Properties of Ga-Doped ZnO Films
Deposited on Flexible Substrate by DC Magnetron Sputtering
D.Y. Lee, J.R. Lee, D.G. Kim, G.H. Lee, Y.S. Kim and
P.K. Song .................................................. 185
A Study on the SiC/Al Composites Fabricated by Pressureless
Infiltration
K.H. Sang and C.F. Wan ..................................... 189
The Resistivity-Temperature Property of Transition Metal
Oxide Co3O4 with In2О3 Addition
S. Liang, J.Q. Gao, J.F. Yang and M. Luo ................... 193
The Effect of Alloying Cu on Pitting Corrosion Resistance of
Copper-Bearing Ferritic Stainless Steel
W. Zhang, D.N. Zou, H.H. Yao and J. Yang ................... 197
D. Recycling/Substitute of Hazardous Materials
Removal of Carbon Nanoparticle Using NO2 Oxidation Technique
J.H. Jung, J.B. Choo and S.S. Kim .......................... 201
Effect of MSW Incineration Bottom Ash in Clay Based Ceramics
S. Kasuriya, S. Jiemsirilers and P. Thavorniti ............. 205
Manufacturing of Construction Materials from Municipal
Incinerator Residue
D.Y. Shin and K.N. Kim ..................................... 209
Adsorption Behavior of Wheat Straw Carbon for Chromium (VI)
Ion
R. Chand, T. Watari, T. Torikai, M. Yada and K. Inoue ..... 213
Gelatin-Glutaradehyde-Poly(Vinyl Alcohol) Bioadsorbent:
Synthesis, Characterization and Application for Copper(II)
Ion Removal from Synthetic Aqueous Solution
X.G. Luo, F. Liu, X.Y. Lin and J. Zhou ..................... 217
Photocatalytic Cr(VI) Reduction by Anodized TiO2
J.K. Yoon, E.J. Shim, J.W. Ha and H.K. Joo ................. 221
Fabrication of WC and WC(Co) Codeposited Nickel Composite
Coating by Electroplating Method for the Replacement of
Chromium Coating
D.G. Kim and J.H. Lee ...................................... 225
E. Eco-Materials
Oil Removal Using Diethyl Ether Extracted and Ground Kenaf
Core
B.G. Lee, H.J. Lee, D.Y. Shin, Y.H. Jeong, C.W. Jin,
D.H. Cho, K.Y. Lee, D.E. Kim, W.S. Kang, Y.G. Goh and
B.H. Hwang ................................................. 229
Properties of Permeable Concrete Substrate Having Dual Pore
Structures
Z.X. Yang, K.H. Hwang, J.B. Yoon, J.O. Kim and M.C. Kim .... 233
Fabrication of Porous β-Tricalcium Phosphate with Collagen
Composite Materials
Y. Igarashi and J. Matsushita .............................. 237
Absorption and Preservation of Bentonite Containing Smectite
J. Matsushita, S.H. Yang and G.C. Hwang .................... 241
Absorption of Bentonite Compact with Absorbent Polymer
J. Matsushita, S.H. Yang and G.C. Hwang .................... 245
Preparation and Characteristics of Eu and Dy Doped
Sr4Al14O25 Phosphor
H.N. Luitel, T. Watari, T. Torikai and M. Yada ............. 249
Optimization of Earth Resistance by Investigating the
Surge-Wave Response
S.J. Ahn, J.W. Woo, S.J. Ahn, C.G. Park and S.J. Ahn ....... 253
Numerical Simulation of Heat Evolution of Eco-Friendly
Blended Portland Cements Using a Multi-Component Hydration
Model
X.Y. Wang, H.S. Lee and K.B. Park .......................... 257
Numerical Simulation of Autogenous Shrinkage of Eco-Friendly
Blended Portland Cements Using a Multi-Component Hydration
Model
X.Y. Wang, H.S. Lee and S.M. Lim ........................... 261
Using of Ethylene Glycol as Pore-Form Agent to Form
Interconnected Mesopores in Carbonized Phenol Resin
S.J. XU, G.J. Qiao, D.C. Li, H.J. Wang and T.J. Lu ......... 265
Effect of Different Upper Side Types of Plaster Molds on the
Pore Formation of Al Foams via Upward Foaming Method
M.J. Jeong, C.H. Seo, Y.H. Song, K.J. Kang and B.Y. Hur .... 269
Comparative Study on TiH2 and СаСО3 for Fabrication of Mg
Alloy Foams
C.H. Seo, M.J. Jeong, I.Y. Jung and B.Y. Hur ............... 273
Anisotropic Mechanical Properties of Nickel Foams Fabricated
by Powder Metallurgy
Y. Yamada, T. Banno, Y.C. Li and C. Wen .................... 277
Concentration of Organic Acid from Fermented Food Wastes
Using a MF/RO Process
J.W. Lee, J.O. Kim and J.T. Jung ........................... 281
Effect of Different Chemical and Physical Characteristic
Having Lignocellulosic Fibers on Heavy Metal Ion Removal
from Auqueous Solution
H.J. Lee, B.G. Lee, D.Y. Shin and H. Park .................. 285
Fabrication of Porous Plate with Bimodal Pore Size
Distribution Using Molten Slag from Incinerator
T. Watari, K. Ogawa, T. Torikai, M. Yada, M. Akiyama
and M. Ida ................................................. 289
Development of A3003 Alloy Tube for Eco-Friendly Refrigerant
Application
H. Cho, B.S. Lee and H.H. Jo ............................... 293
An Experimental Study of the Characteristics of Environment-
Friendly Construction Materials by Recycling Sewage Sludge
Ash
J.I. Lee, B.W. Jo, Y.S. Yoo and K.H. Cheon ................. 297
Charge and Discharge Properties of Hydrogen in the Alloy
Hydride System with Open Cell Al Foam
L.H. Kim, W.S. Lee, S.H. Ко, J.M. Jang and H.S. Kim ........ 301
Preparation and Characterization of High Compressive
Strength Geopolymeric Monoliths Using Silica Waste
S.G. Son, S.Y. Hong and Y.D. Kim ........................... 305
Development of Free Nitric acid, Non-P Desmut Solution for
Surface Treatment Aluminium Alloys
S.H. Son, D.C. Kwon and D.W. Jeong ......................... 309
Effect of Impurities on Formation of Pores in Porous Alumina
during Unidirectional Solidification
S. Ueno, L.M. Lin and H. Nakajima .......................... 313
Development of Inorganic Binder with MSWI Ash
W.K. Lee, E.Z. Park, Y.D. Kim, S.G. Son and J.H. Lee ....... 317
Comparison of Porous Ceramic Materials with Low Thermal
Expansion Coefficient Prepared with SiC and В1аск-А12О3
I. Juárez Ramírez, K. Matsumaru, K. Ishizaki and
L.M. Torres-Martínez ....................................... 321
Development of Porous Materials Using Sewage Sludge by
Molten-Salt Method
Y.S. Yoo, K.H. Cheon, J.I. Lee, B.S. Kim, W.S. Shin and
J.B. Kim ................................................... 325
Zeolite Synthesis Using Sewage Sludge by Molten-Salt Method
Y.S. Yoo, K.H. Cheon, J.I. Lee, B.S. Kim, W.S. Shin and
G.T. Seo ................................................... 329
Effect of SPS on Surface Characteristics of Gas-Atomized
Mg-6wt%Al-lwt%Zn Alloy by Non-Hazardous PEO Treatment
S.Y. Chang, D.H. Lee, H.G. Cho, Y.S. Song, S.H. Kim and
C.B. Lee ................................................... 333
Dehumidification of Air by the Composite Membrane Coated
with Hydrophilic Polymer on Inorganic Substrate
K.H. Song, S.H. Cho and K.R. Lee ........................... 337
Mineralogical Characterization of Villa Reyes Mexico Kaolin
for Industrial Applications
F. Vázquez Acosta, L.M. Torres-Martínez, L.L. Garza-Tovar,
A. Martínez-de la Cruz and W. López González ............... 341
Performance of a Two-Phase Carbon Dioxide-Filled Thermosyphon
S.J. Jeong and K.S. Lee .................................... 345
Refractive Index of SiO2-В2О3-А2О3 Glasses
J.Y. Won, S.W. Lee, D.S. Kim, J.K. Lee, S.J. Hwang and
H.S. Kim ................................................... 349
Preparation and Characterization of KGM /ТiO2 Composite
Membrane
X.R. Zhuo, X.G. Luo, X.Y. Lin, Y. Chen and C.G. Xu ......... 353
Preparation of the Nano-Hydroxyapatite/Chitosan/Konjac
Glucomannan Composite as a Novel Degradable Drug Delivery
System
G. Zhou, Y.B. Li and S.W. Lee .............................. 357
Effects of AI Addition on Mechanical Properties of Plasma
Spayed Al2O3-Al Composite Coatings
Z.J. Yin, S.Y. Tao, X.M. Zhou and C.X. Ding ................ 361
Author Index .................................................. 365
Keyword Index ................................................. 369
|
