Organizers and Sponsor .......................................... v
Committees ..................................................... vi
Preface ........................................................ ix
A. Photocatalysts
A Study Regarding the Diminutive Effect of Emission of Indoor
Air Pollutant (HCHO, TVOC) from After-Treatment Materials
such as Ceramic and Catalyst
S.Y. Na, M.H. Chung, J.R. Sohn and J.C. Park ................. 1
A Textile Waste Water Treatment System Using Photocatalytic
Reactor and Catalyst Recycle Unit
S. Tawkaew, T. Sooknoi, A. Jaroenworaluck,
T. Panyathanmaporn and S. Supothina .......................... 5
Adhesion Improving of TiO2-Coated Fabrics
O. Nimittrakoolchai, T. Panyathanmaporn, A. Jaroenworaluck
and S. Supothina ............................................. 9
Ag-Doped ТiO2 Immobilized on Al2O3 Bead as Oxidation Catalyst
T. Panyathanmaporn, A. Jaroenworaluck, S. Supothina,
R. Chumnanklang, K. Juengsuwattananon, S. Jinawath,
T. Sooknoi, S. Jiamsakul and S. Tawkaew ..................... 13
Antenna Mechanism and De-Aggregation Concept: Novel
Mechanistic Principles for Photocatalysis
C.Y. Wang, R. Pagel, J.K. Dohrmann and D.W. Bahnemann ....... 17
Catalytic Decomposition of Methane: Effect of Various Factors
on Catalytic Properties
H.C. Shin, H.J. Kim, D.S. Yun, J.W. Yoo, D.J. Lee,
S.H. Lee and Y.J. Kang ...................................... 23
Characterization and Wettability of ТiO2 Films Deposited by
Mid-Frequency Magnetron Reactive Sputtering
Y. Cui, H. Du, S.W. Lee, C. Sun and L.S. Wen ................ 27
Characterization of Flame-Generated TiO2 Deposited Activated
Carbon Fibers (ACF)
J.H. Park, J.H. Ji, J.H. Byeon, G.W. Lee and J.H. Hwang ..... 31
Control of Organic Micropollutants Using Dual Functional
Adsorbent/Catalyst System
J.H. Kim, S.J. Kim, C.H. Lee and S.H. Lee ................... 35
Crystalline Phases and Particle Characteristics of the
Combustion-Synthesized ТiO2 Nanoparticles
G.W. Lee and S.M. Choi ...................................... 39
Design of Rotational Particle Structure with Negative
Poisson's Ratio Using Numerical Method
M.K. Lee, J.B. Choi, K.W. Choi and H.N. Lim ................. 43
Effect of Deformation Temperature and Strain on
Recrystallization Behavior of a Nb Micro-Alloyed Steel
Z.H. Zhang, X.K. Liang and Y.N. Liu ......................... 47
Effects of Dye Mixing on Photocatalytic Splitting of H2O into
H2 and O2 on КТаO3
H. Hagiwara, H. Matsumoto and T. Ishihara ................... 51
Emergence Change of Carbon Dioxide from Artificial Skin by
Titania Photocatalyst
E. Watanabe, M. Fukaya and H. Taoda ......................... 55
Enhanced Photocatalytic Activities of Ta2O5 and Nitrogen
Co-Doped Ti02 under Visible Light Irradiation
Y. Shen, T.Y. Xiong and K. Yang ............................. 59
Growth and Microstructure of Gallium Phosphide Nanowires
Synthesized by the CVD Method Using Copper Oxide as a Catalyst
K.H. Choi, K.K. Cho and Y.Y. Kim ............................ 63
High-Aspect-Ratio Titanium Oxide Nanotubes Anodized in
KH2PO4/NH4F/ Citric Acid Electrolytes
S.J. Cho, J.O. Kim, D.J. Yang and W.Y. Choi ................. 67
Hydrothermal Synthesis of Nanosized ТiO2 Using Basic Peptizing
Agents and their Photocatalytic Activity on the Decomposition
of Orange II
J.H. Kim, K.T. Lim, G.D. Lee, S.S. Park and S.S. Hong ....... 71
Improved Adhesion to ABS Plastics by a Photocatalytic
Reaction
G.G. Kim, J.A. Kang, S.J. Kim, S.J. Kim and S.H. Shin ....... 75
Inhibition Effects of Inorganic and Polymer Coagulants on
Acidogenic Fermentation
J.O. KimandJ.T. Jung ........................................ 79
A Study for Synthesis of Nanobelt and Nanowire Nickel
Powders by Wet Chemical Method
S.Y. Jeon, E.J. Chae, W.K. Lee, G.D. Lee, S.S. Hong,
S.Y. Yoon and S.S. Park ..................................... 83
Nano-Al203 Reinforced Fe-Cr-Ni Composites Fabricated by
Reactive Hot Pressing
C. Chen, T. Yu, J.F. Yang, J.Q. Gao, Z.H. Jin and
K. Niihara .................................................. 87
NOx and SOx Removal by Low Temperature Plasma-Photocatalysts
Hybrid System
D.J. Kim, A. Nasonova, J.H. Park, J.Y. Kang and K.S. Kim .... 91
Performance of Photocatalytic Microfiltration with Hollow
Fiber Membrane
J.T. Jung, J.O. Kim and W.Y. Choi ........................... 95
Phase Transformation of ТiO2 in the Preparation of Pearlescent
Pigment
T.G. Kim, H.J. Kim, J.J. Kim, S.W. Kim, S.S. Park,
S.S. Hong and G.D. Lee ...................................... 99
Photocatalytic Activity of Doped NaTaO3 and NaNbO3:
(Y, La, Nd, Sm) Sol Gel on Degradation of Rhodamine В by UV
Irradiation
L.M. Torres-Martínez, L.L. Garza-Tovar, M.E. Meza-de la
Rosa, A. Martínez-de la Cruz and A. Cruz-López ............. 103
Photocatalytic and Photoelectrochemical Properties of
Nitrogen-Substituted ТiO2 Thin Films Prepared by an RF
Magnetron Sputtering Deposition Method
M. Kitano, T. Kudo, M. Matsuoka, M. Ueshima and M. Anpo .... 107
Photocatalytic Degradation of NO2+ by Fe3+-Doped ТiO2 Nano
Particles Prepared by Sol-Gel Method
K.H. Qiu, C.M. Zhang, J.F. Li, Q. Li and J. Zhao ........... 111
Photocatalytic Degradation of Organics Diluted in Water
Using ТiO2 Loaded on Fluoride-Modified Mesoporous Silica
S. Kawasaki, Y. Okada, S. Yuan, K. Mori and H. Yamashita ... 115
Preparation of CeO2 Nanophotocatalyst Using Precipitation
Method
K.H. Qiu, Y.R. Wang, P.C. Zhang and W. Zhang ............... 119
Preparation of Mesostructured Carbon (MSC) for Removal of
Natural Organic Matter (NOM) in Aqueous Solution
H.R. Jung, S.D. Seo and H.C. Choi .......................... 123
Preparation of TiO2/SiO2 Hybrid Hardcoatings on Stainless
Steel and its Photocatalytic Effect
J.S. Park, D.S. Kim, H.M. Lim, D.H. Kim, J.H. Jeong and
S.H. Lee ................................................... 127
Removal of Heavy Metal Ions from Aqueous Solution by
Manganese Dioxide-Coated Polypropylene Granules: An
Implication of Rainwater Runoff Treatment
S.A. Mavlyankariev and D.S. Rhee ........................... 131
Removing Algae with Pt-Doped ТiO2 Coatings on Foamed Glass
J.J. Song, S.H. Cho, S.W. Lee, Т.Н. Kim and Y. Hayashi ..... 135
Suspension Stability of ВаТiO3 Nanoparticles under Electrical
Applied Field
Y. Kim and B.S. Jun ........................................ 139
Synthesis of Titania Nanoparticles via Spark Discharge
Method Using Air as a Carrier
H.C. Oh, J.H. Ji, J.H. Jung and S.S. Kim ................... 143
Synthesis, Preparation and Catalytic Activities of V-Doped
ТiO2 Gel Coating on Porous α-Al2O3 Beads
A. Jaroenworaluck, T. Panyathanmaporn,
B. Soontornworajit, S. Supothina, S. Tawkaew, S. Jiamsakul
and T. Sooknoi ............................................. 147
The Effect of Isothermal Heat Treatment on the Rolling
Contact Fatigue of Carburized Low Carbon Microalloyed Steel
J.S. Lee, B.H. Song, H.G. Sung, S.Y. Kim and B.Y. Hur ...... 151
Mechanism of PVC's Solid-Phase Photocatalytic Degradation
Enhanced by Plasma
X.J. Li, G.J. Qiao and J.R. Chen ........................... 155
Titania Coating of Wasted Silica Particles and their
Photocatalytic Property
S. Karino, H. Abe and J. Hojo .............................. 159
Visible Light Response of ZrO2 by Nitriding and its
Photocatalytic Activity
T. Mishima, M. Matsuda and M. Miyake ....................... 163
Visible-Light Activity of N-Doped ТiO2 Powders and their
Applications
W.B. Cao, Y. Wei, Y.H. Li and X.N. Zhang ................... 167
XPS Investigation of Passive Layer on Copper-Bearing
Antibacterial Ferrite Stainless Steel
D.N. Zou, X.J. Wan and W. Zhang ............................ 171
B. Incorporating an End-of-Life Strategy into Materials
Design
Effect of Sn-Addition on the Bonding Strength between
Casting Au-Pt-Cu Alloy and Si02-Based Porcelain
S.H. Lee, J.W. Byeon, J.M. Doh, H.N. Lim, J.K. Yoon and
H.Y. Jung .................................................. 175
A Study on Boiling Heat Transfer Augmentation of Heating
Process Using Ultrasonic Vibrations
H.D. Yang and Y.K. Oh ...................................... 179
A Study on High Temperature Oxidation of Titanium Alloys in
Solid State Bonding Process
H.S. Lee, J.H. Yoon and Y.M. Yi ............................ 183
Affinity of Cd and Ni on IDA Immobilized Magnetic Beads with
Different Lengths of Spacer Arms
H.S. So, Y.S. Yoo and A. Schaeffer ......................... 187
Antimicrobial Characteristics of Metal Deposited ACF Filters
K.Y. Yoon, J.H. Byeon, B.J. Ко, J.H. Park, C.W. Park,
J.H. Hwang and H.S. Yoon ................................... 191
Application of Inclined Cooling Plate to Fabrication of
Semi-Solid Cast Iron
S.Y. Shim, H.G. Seong, J.H. Jeong and S.G. Lim ............. 195
Application of Platinum and Titanium Materials as an
Electrode for Hygiene Purpose
B.S. Oh, S.Y. Park, Y.J. Jung, K.W. Baek, T.M. Hwang,
K.S. Cho and J.W. Kang ..................................... 199
Axial Compression and Bending Characteristics of CFRP Hat
Shaped Member According to Orientation Angle
J.H. Kim, K.S. Lee and l.Y. Yang ........................... 203
Comparison of Intensity Method and Counting Method in
Measurement of Fiber Orientation Angle Distribution Using
Image Processing
J.W. Kim and D.G. Lee ...................................... 207
Deformation Behavior of Functionally Graded Ti-Ni Shape
Memory Alloys
Т.Н. Nam, H.G. Kim, J.Y. Choi, J.M. Lee, S.B. Kang and
C.Y. Lim ................................................... 211
Deposition and Characterization of D-Gun Sprayed WC-Co
Coating with Self-Lubricating Property
H. Du, С. Sun, J. Gong and S.W. Lee ........................ 215
Development of Eco-Flux Laminated Strip for Air Atmosphere
Brazing
Y.S. Shin, Y.S. Lee and C.H. Lee ........................... 219
Development of Miniaturized Micro Metal Forming Manufacturing
System
H.J. Lee, N.K. Lee and S.G. Choi ........................... 223
Distribution and Shape of the Pores in Water Permeable
Concrete
Z.X. Yang, J.B. Yoon, J.O. Kim, K.H. Hwang, B.S. Jun,
J.B. Lee and M.C. Kim ...................................... 227
Dome-Shaped High Power Transformer for Driving A 61 W T5 Lamp
M.S. Yoon, I.H. Kim and S.C. Ur ............................ 231
Effect of Aging on Damping Capacity of AZ91 Alloy
J.H. Jun, G.H. Lee, J.M. Kim, K.T. Kim and W.J. Jung ....... 235
Effect of Annealing on the Mechanical Property and
Machinability of Free-Cutting Phosphor Bronze Alloy
H. Cho, B.S. Lee, J.S. Yang and H.H. Jo .................... 239
Effect of Annealing Treatment on Solid State Recycled
Magnesium Alloy AZ91D
Y.N. Lin , J.Y. Wang, and S. Lee ........................... 243
Effect of Cr on the High Temperature Corrosion of Al3Ti-Cr
Alloys in SO2 Atmosphere
J.H. Choi and D.B. Lee ..................................... 247
Effect of Dam Design on the Fluid Flow in T-Shaped
Continuous Casting Tundish
S.H. Hong, J.H. Kang and J.W. Han .......................... 251
Effect of Load on the Abrasive Wear of Silica-Filled Epoxy
Resin Composites
S.W. Koh, H.J. Kim, J.D. Kim, B.T. Kim, S.O. Hwang and
W.S. Choi .................................................. 255
Effect of Product Quality on Life Cycle Assessment in
Aluminum Die Casting Process
S.K. Kim ................................................... 259
Effect of Rare Earth on the Microstructure and Performance
of SnAgCuRE Solder
J.Y. Zhang, G. Bai, K.K. Zhang, Y.H. He and S. Yang ........ 263
Effect of the Size of the Reinforcement Phased on the
Properties of Silica-Filled Composites
H.J. Kim, S.W. Koh, J.D. Kim and B.T. Kim .................. 267
Effect of Thermo-Mechanical Processing on Microstructure and
Elastic Modulus of Metastable Ti-Nb-Si Alloys for Biomedical
Application
H.S. Kim and W.Y. Kim ...................................... 271
Effects of Homogenization Treatment on Thermoelectric
Properties of Ba8Al16Si30
J.H. Lee, J.I. Lee, Y.H. Kim, I.H. Kim, K.W. Jang,
S.C. Ur, H.C. Choe and G.S. Yang ........................... 275
Effects of Isothermal Heating Process and Rare Earth
Elements Addition on the Mechanical Properties of Semi-Solid
Formed Mg-5%Zn Alloys
J.M. Kim, J.H. Jun, K.T. Kim and W.J. Jung ................. 279
Effects of Manganese on Microstructure and Mechanical
Properties of AZ31 Magnesium Alloy Processed by Differential
Speed Rolling
X.S. Huang, K. Suzuki, A. Watazu, I. Shigematsu and
N. Saito ................................................... 283
Effects of Processing Factors on the Mechanical Properties
of PBO Filament/ Epoxy Composite Materials
B. Wang, Z.H. Jin, Z.M. Qiu and A.H. Liu ................... 287
Effects of RPM, Bath Temperature and Anodizing Time in
Anodizing for Mg-Al Alloy under Constant Current
S.J. Kim and J.I. Kim ...................................... 291
Effects of Samarium on Microstructure and Mechanical
Properties of Mg-Al-Ca Alloys
H.T. Son, J.S. Lee, Y.K. Kim, I.H. Oh, K. Yoshimi and
K. Maruyama ................................................ 295
Electromagnetic Absorption Behaviors of Ferromagnetic Fe-Cr
Alloy Powder and Polymer Composites in the Radio Frequency
Range
S.W. Kim and S.J. Lee ...................................... 299
Electromagnetic Properties of Bi System Superconductor
S.H. Lee ................................................... 303
Evaluation of Indentation Test for Measuring Young's Modulus
of Cancellous Bone
M.K. Lee, K.W. Choi, T.S. Lee and H.N. Lim ................. 307
Evaluations of Microstructure and Hydrogenation Properties
on Mg2NiHx Hydrogen Absorbing Alloys by Hydrogen Induced
Mechanical Alloying
W.G. Kim, S.C. Ur, Y.G. Lee, Y.J. Kim and T.W. Hong ........ 311
Evolution of Al Alloy Melt Foam Pore Structure in Foaming
Process
D.H. Yang, C.H. Seo, D.P. Yaoand B.Y. Hur .................. 315
Extrudability Improvement of 7000 Series Al Wrought Alloys
by Thixoextrusion
Y.O. Yoon, D.I. Jang, H.H. Jo and S.K. Kim ................. 319
Fabrication of Lotus-Type Porous Ni-(15,28 and 31) at.% Al
Alloys by Unidirectional Solidification in Hydrogen
Atmosphere
S.K. Hyun, T. Ikeda and H. Nakajima ........................ 323
Finite Element Analysis for Precision Forging Process of
United Transfer Driven Parking Gear
G.A. Lee, S.J. Lim, D.J. Kim and Y.B. Park ................. 327
Formation of Boride Eutectic with Addition of Boron in Mod.
12Cr-lMo Steels
G.S. Choi, Y.H. Kim, S.S. Kang, Y.G. Jung, J.H. Lee and
S.H. Rye ................................................... 331
Glass-Polydimethysiloxane Hybrid Microthermostat for
Restriction Enzyme Digestion
Y.J. Ко, D.J. Kim, W. Cho, Y.M. Ahn and S.Y. Hwang ......... 335
Hertzian Indentation Damage Behavior of Highly Porous
Silicon Nitrides
H. Zeng, HJ. Wang, D.B. Lin, Y. Bai, G.J. Qaio and
J.Q. Gao ................................................... 339
High Temperature Corrosion of Т13АlС2 in Ar-l%SO2 Atmosphere
D.B. Lee and J.H. Choi ..................................... 343
Hollow Amorphous Formation via Oxidation of Al Nanoparticles
at Low Temperatures
R. Nakamura, J.G. Lee, D. Tokozakura, H. Mori and
H. Nakajima ................................................ 347
Hybrid Tooling Using High Speed Cutting and Ceramic Filled
SLA (StereoLitbography Apparatuses) Technologies
H.K. Kwonand J.S. Kim ...................................... 351
Identification of Phases in the Wide-Gap Region Brazed with
BNi-3 Filler Metal Powder Using Electron Backscatter
Diffraction
Y.H. Kim, I.H. Kim, K.T. Kim, S.Y. Shin and S.I. Kwun ...... 355
Influence of Interlayer on the Corrosion Behavior of
Multilayered WC-T1-x,AlxN Coatings in Deaerated 3.5% Sodium
Chloride Solution
J.H. Hong, S.H. Ahn and J.G. Kim ........................... 359
Influence of Particles on Cell Structure of Al-Mg Alloys
Foamed by Melt Foaming Method
S.H. Park, H.G. Seong, Y.H. Song, C.H. Seo, Zulkifli and
B.Y. Hur ................................................... 363
Influence of Process Parameters on the Adhesive Strength of
CrN Coatings
G.C. Jeong, I.H. Kim and S.I. Kwun ......................... 367
Influence of Reheating Profile on Microstructural Evolution
of 2024 AI Wrought Alloy for Thixoextrusion
D.I. Jang, Y.O. Yoon, H.H. Jo and S.K. Kim ................. 371
Influence of the Ball Diameter, Material and Taper Design on
Transferred Stresses of Ceramic THR
S.W. Lee, D.G. Carrillo, D.K. Kang and J. Lira-Olivares .... 375
Influence of Zircon Addition on Thermal Shock Resistance of
ZTA for Plasma Reactors
K.H. Jang and B.R. Cho ..................................... 379
In Situ Joining of Combustion Synthesized Ni3Al
Intermetallic Compounds with AZ91D Mg Alloy
G.S. Cho, K.R. Lee, K.H. Choe, K.W. Lee and K.Y. Kim ....... 383
In Situ Synthesis of Сор/Cu Coating by Laser Cladding
Y. Lu, J.H. Lee and Y.Z. He ................................ 387
Investigation of Thermal Shock Behaviors for Machinable
SiC/h-BN Ceramic Composites
H.Y. Jin, G.J. Qiao and J.Q. Gao ........................... 391
H. Mechanical Properties and Formability of AZ31
Magnesium Alloy Processed by Differential Speed Rolling
X.S. Huang, K. Suzuki, A. Watazu, I. Shigematsu and
N. Saito ................................................... 395
Microstructural Evolution and Crystal Orientation of
Electromagnetically Stirred Al Alloy in the Semi-Solid State
D.Y. Lee, S.W. Kang, H.Y. Kim and K.B. Kim ................. 399
Microstructure Analysis and Characterization of
Li(Ni1-xCox)O2 Thin Film Prepared by Li Diffusion on Ni-Co
Alloy Substrates for Cathode Application
J.S. Таk, J.K. Chung, S.S. Kim, S.G. Lee and C.J. Kim ...... 403
Microstructure and Formability of Different-Speeds Rolled
AZ31 Mg Sheet
J.S. Lee, H.T. Son, Y.K. Kim, I.H. Oh, C.S. Kang and
J.C Bae .................................................... 407
Microstructure and High Temperature Mechanical Properties of
Inconel 617
T.S. Jo, G.S. Kim, Y.I. Seo, W.S. Ryu and Y.D. Kim ......... 411
Microstructure and Mechanical Properties of Si3N4/hBN
Composites Prepared by Hot-Pressing Using Nitrided Si3N4
Powders
K.J. Lee, C.H. Jin, W.S. Hwang and W.S. Cho ................ 415
Noncombustible Magnesium Alloy Processed by Rotary-Die Equal
Channel Angular Pressing Method
A. Watazu, I. Shigematsu, X.S. Huang, K. Suzuki and
N. Saito ................................................... 419
Passive-Active Transition Behavior of 304 Stainless Steel
W.S. Hwang, J.J. Lee, W.S. Yang and S.C Na ................. 423
Prediction of Temperature Distribution during Curing Thick
Thermoset Composite Laminates
J.H. Oh .................................................... 427
Processing and Properties of Al Based Amorphous/Crystalline Alloy
Composites
T.J. Sung, Т.К. Jung, M.S. Kim and S. Yi ...................... 431
Processing, Microstructure and Mechanical Properties of
Hybrid Materials with Al-Mg Alloy and its Composites
H.G. Cho and S.Y. Chang .................................... 435
Product Geometry for Process Parameter during Rotary Swaging
Process as Chipless Forming Process
S.J. Lim, H.J. Choi, D.J. Yoon, H.G. Jeong and C.H. Lee .... 439
Recycling of 6061 Aluminum Alloy Cutting Chips Using Hot
Extrusion and Hot Rolling
K. Suzuki, X.S. Huang, A. Watazu, I. Shigematsu and
N. Saito ................................................... 443
Research on High-Purified Lignin Thermoplastics
X.G. Luo, W.L. Li and X.Y. Lin ............................. 447
Residual Stress Measurement of Plasma Sprayed Coating
Layers in Zr02
S.W. Lee, J. Zhang, H. Chen, J.S. Song, J.K. Seo, Z. Yi
and T. Sekino .............................................. 451
Strength of AZ31 Alloys Subject to Severe Deformation by
ECAP and DSR
W.J. Kim and H.G. Jeong .................................... 455
Structure-Mechanical Properties Correlation in
a Hydrogenated Ti-Based In Situ Amorphous Matrix Composite
S. Jayalakshmi, E. Fleury and K.B. Kim ..................... 459
Studies on Rheological Property and Miscibility of
Lignosulfonate/Polystyrene Blends
J. Zhou, X.G. Luo and X.Y. Lin ............................. 463
Study on the Application of Infrared Thermovision Camera for
Efficiency Analysis of Solar Cell
C.J. Choi, J.Y. Kim, D.J. Yang, K.S. Song and L.K. Kwac .... 467
Study on the Microstructure of Polycrystalline Silicon Films
Treated with Line Shaped Electron Beam
L. Fu, F. Gromball and J. Müller ........................... 471
Study on the Oxidation and Electrical Resistivity of
Reaction-Bonded Silicon Carbide at High Temperature
Z.L. Lu, H. Xie, J.Q. Gao and Z.H. Jin ..................... 475
Surface Modification of a Dental Ti by Blasted Coating of
Bio-Active Calcium Phosphate
H.Y. Jung, S.H. Lee, J.W. Byeon, J.M. Doh, K.T. Hong and
H.N. Lim ................................................... 479
Synergistic Effect of Hybrid Filler Contained Composites on
Thermal Conductivity
D.H. Kim, M.H. Kim, J.H. Lee, J.H. Lim, K.M. Kim,
B.C. Lee, J.M. Park and S.R. Kim ........................... 483
The Behavior of Phase Transformation Characteristics and
Ageing on Alloying Method of CuZnAl Shape Memory Alloy
G.S. Yang, J.I. Lee and W.Y. Jang .......................... 487
The Influence of Microstructure on the Friction Properties
of Carbon/Carbon Composites
Z.C. Xiao and Z.H. Jin ..................................... 491
Ti-Ca-P Films Formed by RF Magnetron Sputtering Method Using
Dual Targets
A. Watazu, K. Kimoto, S. Tsutomu, K. Tanaka, T. Sawada,
M. Toyoda and N. Saito ..................................... 495
Fabrication and Characterization of Slag Fiber by Melt
Extraction
Y.H. Song, H.G. Seong, S.H. Park, D.K. Ahn, C.H. Seo and
B.Y. Hur ................................................... 499
C. Use of Non-Hazardous Components as Substitutes for
Traditionally Hazardous Components as well as the Treatment
of Waste Materials
A Study of Alternative Construction Materials for Slag
Derived from Steel Making Industry
K.H. Lee, K.S. You, J.W. Ahn and B.C. Ban .................. 503
A Study on Thermal Stabilization of Spent Foundry Sand
S.W. Rhee .................................................. 507
A Window of Opportunity: Designing Carbon Nanomaterials for
Environmental Safety and Health
L. Guo, X.Y. Liu, V. Sanchez, C. Vaslet, A.B. Kane and
R.H. Hurt .................................................. 511
Application in Up-Flow Filtration of Filter Material for
Urban Stormwater Control
B.G. Kim, H.J. Park and B.C. Lee ........................... 517
Application of Gypsum Granule as a Capping Material to
Reduce Phosphorus Release from Sediment of Lake Paldang
Y.J. Park, J.J. Ко, Y.I. Kim, S.L. Yun, S.J. Kim and
B.C. Lee ................................................... 521
Beneficial Reuse of Coal Fly-Ash as Porous Reactive
Aggregates for Removal of Hydrogen Sulfide
T.Y. Lee ................................................... 525
Changing Morphology and Crystal Structure in Ettringite by
Trivalent Chromium
K.S. You, J.W. Ahn, D.Y. Han, K.H. Cho and H. Kim .......... 529
Characteristic of Carbonation Reaction from Municipal
Solid Waste Incinerator Bottom Ash as a Function of Water
Content and their Effect on the Stabilization of Copper and
Lead
J.W. Ahn, H.C. Cho, K.S. You, G.C. Han and N.I. Urn ........ 533
Conversion of Used Glass Bottles to Porous Materials by
Using Hydrothermal Technique
K. Yanagisawa, N.Z. Bao, M. Kariya, A. Onda,
K. Kajiyoshi, Z. Matamoras-Veloza and J.C.
Rendцn-Angeles ............................................. 537
Design of Glass-Ceramic Matrix by Modification of
Microstructure for High Strength LTCC Application
J.H. Kim, S.J. Hwang and H.S. Kim .......................... 541
Development of Artificial Soil Using Sewage Sludge
Y.S. Yoo, H.C. Shin, H.S. So, B.S. Kim and J.B. Kim ........ 545
Dielectric Properties of Sol Infiltrated Lead Zirconate
Titanate Ferroelectric Thick Films
S.G. Lee, S.M. Park, Y.H. Lee and S.P. Nam ................. 549
Effect of Grinding and Extraction of Lignocellulosic Fiber
on Oil Sorption
B.G. Lee, H.J. Lee, D.Y. Shin, Y.H. Jeong, J.C. Wu,
D.H. Cho, K.Y. Lee, D.E. Kim, W.S. Kang and Y.G. Goh ....... 553
Effect of Magnetic Separation in Heavy Metals of Municipal
Solid Waste Incineration Bottom Ash
G.C. Han, N.I. Um, K.S. You, H.C. Cho and J.W. Ahn ......... 557
Efficiency of Gypsum as a Capping Material for the Capturing
of Phosphorus Release from Contaminated Lake Sediments
S.K. Kim, Y.J. Park, S.L. Yun and M.K. Lee ................. 561
Evaluation of Capping Materials for the Stabilization of
Contaminated Sediments
S.L. Yun, S.J. Kim, Y.J. Park, S.W. Kang, P.J. Kwak,
J.J. Ко and J.H. Ann ....................................... 565
Evaporation and Stabilization of Heavy Metals with Colloid/
Interface Properties in EAF Dust-Clay Bodies
Y.M. Wie and K.G. Lee ...................................... 569
Filtration Treatment of Pollutants in Urban Runoff Using
Expanded Polypropylene Media
S.W. Kang, B.C. Lee, Y.I. Kim, S.L. Yun, Y.J. Park and
J.H. Ahn ................................................... 573
Grain Size and Orientation Control in Lead-Free
(Bi,La)4Ti3O12 Thin Film Deposited by Spin-On Method for
High Density FeRAM Device
Y.M. Kim, G.E. Jang, N.K. Kim, S.J. Yeom and S.Y. Kweon .... 577
Impact Sound Reduction Analysis of Concrete Slab Containing
Artificial Lightweight Aggregates Fabricated Using a Sewage
Sludge
K.D. Kim and S.G. Kang ..................................... 581
Investigation of Plasticity Index of Clay Bodies Including
Bottom Ashes from the Power Plant
H.J. Chun, Y.T. Kim, G.G. Lee, S.G. Kang and J.H. Kim ...... 585
Performance of Bismuth Oxide in the Cathaphoretic Epoxy
Primers
W.S. Yang, S.H. Ahn, J.S. Seo, W.S. Cho, J.G. Kim and
W.S. Hwang ................................................. 589
Preparation and Standardization of Method for Valuable
Metals Analysis in Seawaters
H. Yoon, M.Y. Shin, C.H. Yoon, J.C. Lee and K.S. Chung ..... 593
Preparation of Adsorbent from Mine Residues
C.H. Shim, W.K. Lee and H.J. Ban ........................... 597
Properties of Artificial Aggregate for Orchid Culture
Fabricated from Solid Wastes
H.J. Lee, Y.T. Kim, G.G. Lee, J.H. Kim and S.G. Kang ....... 601
Properties of Waste Derived Mullite
U. Sangwanna, M. Buaheepkaew, O. Kosasang and P. Saewong ... 605
Quality Characteristics of MSWI Ash Melted Slag by
Crystallization
H.C. Shin, B.S. Kim, H.S. So, Y.S. Yoo and J.B. Kim ........ 609
Recovery of Silica and Sodium Fluoride from
Hexafluorosilicic Acid and Sodium Silicate
J.K. Kim, J.K. Park and H.K. Kim ........................... 613
Recycling of Waste Rock as a Filler to Prevent Ground
Subsidence
W.K. Lee, H.J. Ban and I.R. Im ............................. 617
Reliability Evaluation of Underfill Encapsulated Pb-Free
Flip Chip Package under Thermal Shock Test
D.G. Kim, J.W. Kim, S.S. Ha, J.M. Koo, B.I. Noh and
S.B. Jung .................................................. 621
Remodeling Techniques of Water Storage Tanks and Residual
Chlorine Remaining Devices
S.K. Kim, H.D. Lee, P.J. Kwak, S.J. Kim, S.H. Hong,
S.J. Kim and J.S. Choi ..................................... 625
Soft Ground Improvements Using Natural Fiber
J.H. Kim, S.D. Cho, Y.S. Jang and S.S. Kim ................. 629
Structural and Electrical Properties of Lead Zirconate
Titanate Thick Films Fabricated by Screen-Printing Method
S.G. Lee and S.M. Park ..................................... 633
Utilization of Waste Tires to Reduce Railroad Vibration
S.D. Cho, J.M. Kim, J.H. Kim and K.W. Lee .................. 637
D. Manufacturing Using a More Environmentally Friendly
Process as well as Biomaterials
Solid State Foaming and Free-Forming of Closed Pore
Utilizing the Superplasticity of Zirconia Ceramics
A. Kishimoto, T. Higashiwada, M. Takahara and H. Hayashi ... 641
A Study on Supercooling Characteristics of Clathrate
Compounds with Concentration of TMA
C.O. Kim, J.H. Kim and N.K. Chung .......................... 645
Apatite Formation on Silicon Suboxide Film Prepared by
Pulsed Metal Vacuum Arc Depositen
Y.T. Xie, X.Y. Liu, C.X. Ding and P.K. Chu ................. 649
Apatite Formation on Surface of Plasma-Sprayed ТiO2 Coating
by Sulfuric Acid Treatment
X.B. Zhao, X.Y. Liu, Y.T. Xie, Z.G. Chen and C.X. Ding ..... 653
Application of Cr-X-N Thin Film to Improve the Tribological
Properties of Environment Friendly Hydraulic Components
S.Y. Lee, J.T. Kim, B.Y. Lee, Y.S. Hong, E.Y. Kim and
M.K. Kim ................................................... 657
Application of Filtration System to Control Urban Non-Point
Pollution
S.K. Kim, Y.I. Kim, B.C. Lee, S.W. Kang, B.M. Kang,
P.J. Kwak and J.H. Ahn ..................................... 661
Bi-Axial Stretchable Electrode Based on the Thin PDMS
Substrate for the Biomedical Applications
J.Y. Baek, G.H. Kwon, J.H. An, H.J. Chang, K.A. Lee,
K. Sun and S.H. Lee ........................................ 665
Characteristics of Calcium Trisulphoaluminate Hydrates for
Rapid Hardening of Cement Composites
C.B. Kim, B.K. Kim and S.C. Choi ........................... 669
Characteristics of Silica Aerogel Composites Synthesized by
Ambient Drying Method
C.Y. Kim, J.K. Lee and B.I. Kim ............................ 673
Characterization and Fabrication of Nano-Sized Patterns and
Microfluidic Channels Derived from Polyvinylsilazane via
Soft Lithographic Technique
H.J. Lee, J.H. Park, P. Jayakumar, Т.Н. Yoon, L.Y. Hong,
S.H. Park and D.P. Kim ..................................... 677
Characterization of Automobile Shredder Residues for
Chlorine Content and Estimation of it's Circulation in
Cement Kiln
W.T. Kwon, S.R. Kim, Y.H. Kim, J.H. Hwang, V. Dabhade,
T.W. Yoo and S.Y. Bae ...................................... 681
Characterization of Nano-Rod ZnWO4 Prepared by Surfactant-
Assisting Solvothermal Reaction
T. Thongtem, S. Katunyoo and S. Thongtem ................... 685
Chemical and Electrical Properties of ZnS Deposited with DEZ
and H2S by Atomic Layer Deposition Method
S.W. Kuk, S.H. Bang, I.H. Kim, S.Y. Jeon, H.T. Jeon,
H.H. Park and H.J. Chang ................................... 689
Crystal Growth of Aragonite Precipitated Calcium Carbonate
by Seeded Method
W.K. Park, J.W. Ahn, S.J. Ко and С. Han .................... 693
Crystal Growth of KNbO3 by Solution-Dropping Method
T. Yoshiguchi, T. Ota and N. Adachi ........................ 697
Decomposition Characteristic of Carbon Tetrafluoride Using
2.45GHz Microwave at Various Gases
S.Y. Choi, Y. Taguchi, W. Minami, L.H. Kim and H.J. Kim .... 701
Degradation of Azo Dyes by the Reduction and Oxidation with
Nano Sized Zero Valented Iron
B.H. Moon, Y.B. Park, S.S. Kim, G.T. Seo, T.S. Lee and
T.S. Kim ................................................... 705
B. Direct Electroless Copper Plating on Polyimide for FPCB
Applications
J.H. Lee ................................................... 709
Effect of Particle Size on Biocompatibility of Plasma-
Sprayed Hydroxyapatite Coatings
Z. Yi, X.B. Zheng, J. Heng, W. Wei and S.W. Lee ............ 713
Effect of pH on the Dispersion Stability of Aqueous Ferric
Oxide Suspension
C.H. Lee and E.H. Lee ...................................... 717
Effect of Platinum Pre-Coating on Isothermal Oxidation
Behavior of MCrAlY Coating by Plasma Spray Process
D.W. Joo, S.H. Park, Y.G. Jung, J.H. Lee, C.H. Ye and
K.H. Lee ................................................... 721
Effect of Zirconia on the Physical Properties of Cordierite
Honeycomb Filter
S.J. Kim, H.G. Bang, J.W. Moon and S.Y. Park ............... 725
Effects of Post-Annealing on the Electrical and Optical
Properties of ZnO Thin Films Grown on Al2O3 Substrates by
Atomic Layer Epitaxy
C.M. Lee, Y.J. Cho, H.J. Kim, W.W. Lee, H.W. Kim,
C.K. Hwangbo and J.G. Lee .................................. 729
Effect of Several Factors on the Synthesis of Calcium
Hydroxide Prepared by Spray Drying Method Using Limestone
M.K. Choi, J.S. Cho, S.M. Joo, J.K. Park, J.W. Ahn and
H. Kim ..................................................... 733
Effects of Y2O3 on the Piezoelectric Properties of
PSN-PMN-PZT Composition under Various Alternating Electric
Fields
S.C. Ur, Y.G. Choi, J.C Kwon, S.L. Ryu, Y.G. Lee,
J.L. Lee, L.H. Kim, T.W. Hong, S.Y. Kwon and M.S. Yoon ..... 737
Fabrication and Evaluation of the Novel Elastomer Based
Nanocomposite with Pressure Sensing Function
Y.G. Han, T. Shibata, R. Ramaseshan, T. Sekino and
K. Niihara ................................................. 741
Fabrication and Thermoelectric Properties of p-Type
Si0.8Ge0.2 Alloy Doped with Boron
S.D. Hwang, W.K. Min, I.M. Park, Y.D. Park, Y.S. Kim and
Y.H. Park .................................................. 745
Fabrication of Al2O3 Microtubes Using Carbon Fibers and Аl/
Al2O3 Mixed Powder in Solid-Vapor Reaction (SVR) Process
S.W. Myoung, Y.G. Jung and J.H. Lee ........................ 749
Field Effect Transistor with ZnS Active Layer on ITO/Glass
Substrate
I.J. Back, S.C. Gong, H.S. Lim, I.S. Shin, S.W. Kuk,
I.H. Kim, H.T. Jeon, H.H. Park and H.J. Chang .............. 753
Growth Behavior of Carbon Tips Grown by Electron Beam
Induced Deposition Method
S.H. Park, S.H. Kim, J.K. Shin, J.W. Kim, C.J. Kang,
Y.S. Kim and Y.J. Choi ..................................... 757
Hot-Pressed AlN/BN Composite with Excellent Mechanical and
Thermal Properties
T. Kusunose, M.J. Cho, T. Sekino and K. Niihara ............ 761
Microstructural and Mechanical Properties of Polymer-Based
Scaffolds Reinforced by Hydroxyapatite
H.H. Jin, W.K. Lee, H.C. Park and S.Y. Yoon ................ 765
Oxidation of IG-11 Graphite by Air and CO2 Gas
Y.S. Lim, J.N. Lee, S.Y. Kim, T.W. Kim and S.H. Chi ........ 769
Parameters Affecting the Structure and Yield of Carbon
Nanotubes in CVD Method
G.B. Zheng, H. Sano and Y. Uchiyama ........................ 773
Phase Transformation of Nanocrystalline CdS Synthesized by
Solvothermal Reaction
T. Thongtem, A. Phuruangrat and S. Thongtem ................ 777
Porous Scaffold of n-HA/PA66/CS for Tissue Regeneration
H.Z. Xiang, Y.B. Li, Y.H. Mu, X.J. Wang and H. Li .......... 781
Preparation and Characterization of Alumina Nanoparticles
from Alkoxides and Na (AOT) Surfactant
Y.K. Park .................................................. 785
Preparation and Characterization of n-HA/Chitosan Scaffold
Prepared by a New Method of Emulsion-Foaming/Freeze-Drying
Process
L. Zhang, Y.B. Li, P.J. Shi, Y. Zuo and L. Wu .............. 789
Preparation of Nano-Hydroxyapatite/Polyamide 6 Composite
Porous Scaffold for Bone Tissue Engineering
L. Cheng, Y.B. Li, Y. Zuo, G. Zhou, H.N. Wang and
M.B. Wang .................................................. 793
Preparation of Nano-Size PbTiO3 Particles and its
Characteristics on the Adsorption of Organic Acids
K.H. Song, B.M. Kim, J.E. Kim and K.R. Lee ................. 797
Preparation of Nano-Sized Ag Metal Colloid by an Advanced
Wet-Process Using 3-Mercapto-Propionic Acid
M. Tomonari, K. Mori and H. Yamashita ...................... 801
Preparation of Properties of Biodegradable Membranes Using
Natural Polymer/Clay Nanocomposite for the Application of
Dehumidification
J.S. Park, J.W. Rhim, J.S. Na and S.Y. Nam ................. 805
Properties of Organic/Inorganic Hybrid Material Synthesized
from Acrylic Resin and Silane-Terminated CS
Y.T. Kang, J.K. Lee and D.P. Kang .......................... 809
Properties of Sol-Gel Coating Film from Colloidal Silica-
Silane Sol
M.K. Na, M.S. Ahn and H.Y. Park ............................ 813
Properties of Transparent Color Coating Glass Fabricated by
Sol-Gel Technology
T.Y. Lim, Y.M. Park, J.H. Hwang, C.Y. Kim and C.Y. Kim ..... 817
Sintering and Mechanical Properties of Alumina Ceramics
Prepared by Nanosize Alumina
Indra, S.W. Oh and H.J. Kim ................................ 821
Spark Plasma Sintering Behavior of Fe-TiC Composite
Materials Fabricated by Mechanical Alloying
H.J. Cho, S.Y. Bae, I.S. Ahn and D.K. Park ................. 825
Stability Enhancement for Cold Field Emitter for Reliable
Operation of the Micro-Column System
J.H. Kim, S.J. Ahn, C.G. Park, H.S. Kim, D.W. Kim and
S. Ahn ..................................................... 829
Study on Indium Tin Oxide Films Deposited Using Different
Conductive ITO Targets by DC Magnetron Sputtering
J.H. Park, S.C. Lee, G.H. Lee and P.K. Song ................ 833
Study on Non-Destructive Testing of Aerial Complex Material
by DSPI
S.H.Jiaand Y.G. Li ......................................... 837
Study on Silver-Containing HA Coatings Prepared by Vacuum
Plasma Spraying
X.B. Zheng, Y. Zeng, C.X. Ding, S.W. Lee, Z.Y. Zhu and
F.Q. Zhang ................................................. 841
Study on the Precise Alignment of Micro-Lenses in the
Microcolumn by Using the Laser Diffraction Pattern
S. Ahn, D.W. Kim, H.S. Kim, C.G. Park and S.J. Ahn ......... 845
A Study on Vacuum Plasma Spraying Tungsten Coatings
Z. Yi, X.B. Zheng, J. Heng, W. Wei and S.W. Lee ............ 849
Supercritical Impregnation of Organic Phase Change Materials
into Polyester Fiber
C.S. Ju, T.W. Kim and S.Y. Kim ............................. 853
Surface Modification of Li (Co1/3Mn1/3Ni1/3)O2 Fine Powders
Using Aqueous Al2O3 Sol
S.H. Kim, K.B. Shim, K.R. Han and CS. Kim .................. 857
Synthesis and Characterization of Ag-Pd Nanoparticles by
a Reverse Micelle Process
D.S. Bae, S. Kang, K.S. Park and K.S. Han .................. 861
Synthesis and Characterization of CoFe2O4 Nanoparticles by
Glycothermal Process
C.S. Lee and D.S. Bae ...................................... 865
Synthesis and Characterization of Nano-Size CoAl2O4 Spinel
Powder Using Sol-Gel Process
D.Y. Shin, K.N. Kim and S.M. Han ........................... 869
Synthesis and Characterization of Sr1-xLaxFe12-yCoyO19
Nanoparticles Prepared by a Sol-Gel Method Using Propylene
Oxide
S.J. Lee and S.U. Paik ..................................... 873
Recovery of Silica and Sodium Fluoride from
Hexafluorosilicic Acid and Sodium Silicate
J.K. Kim, J.K. Park and H.K. Kim ........................... 877
Synthesis of Precipitated Calcium Carbonate Using
a Limestone and its Application in Paper Filler and Coating
Color
S.H. Cho, J.K. Park, S.K. Lee, S.M. Joo, I.H. Kim,
J.W. Ahn and H. Kim ........................................ 881
The Behavior of Automobile Shredder Residue Chips in
a Precalciner for Cement Manufacturing Process
S.C. Oh, C.M. Jin, J.H. Hong, W.T. Kwon and S.R. Kim ....... 885
The Effect of Applied Pressure on the Nonlinear Behavior of
ZnO Based Ceramics
S.J. Ahn, Y.J. Kim, Y.C. Kim, J.W. Min and S. Ahn .......... 889
The Effect of Processing Additives on Dispersion and
Rheological Properties of Freeze Casting Alumina/Zirconia
and Mullite/Zirconia Slurries
S.W. Lyu, T.Y. Yang, J.M. Lee, S.Y. Yoon, R. Stevens and
H.C. Park .................................................. 893
The Influence of Preparation Condition on
Nano-Hydroxyapatite Prepared in Different Solvent
Y.Y. Wang, Y.B. Li, Y. Zuo, H.N. Wang, L. Cheng and
O. Zhou .................................................... 897
Preparation of CuO Nanopowder in Aqueous Solution by
Applying Ultrasonic and its CO Gas Sensitivity
J.B. Yang, T.G. Ко, S.J. Jung and J.H. Oh .................. 901
The Study on the Application of FLEC Test in Indoor Building
Materials
S.D. Kim, H.K. Lee, C.H. Kim and S.L. Lee .................. 905
Thermal Properties and Microstructure of Zirconia/Monazite-
Type LaPO4 Composites for Powder Preparation Methods
S.H. Kim, T. Sekino, T. Kusunose and A.T. Hirvonen ......... 909
Thermal Properties of Water-Absorbing and Surface Modified
Porous Pavements
R.H. Kim, S.H. Lee, J.H. Lee and C.S. Gee .................. 913
Thermoelectric Characteristics of the Electrodeposited
(BiySb)2Te3 Films with Variation of the Electrodeposition
Current Density
T.J. Yoon, Y.H. Park and T.S. Oh ........................... 917
Thermoelectric Properties of Skutterudite CoSb3 Prepared by
Encapsulated Induction Melting
S.C. Ur and I.H. Kim ....................................... 921
Thick-Film CO2 Sensors Based on NASICON Synthesized by
a Sol-Gel Process
H.J. Kim, J.W. Choi, S.D. Kim and K.S. Yoo ................. 925
Two Types of Phase Separation and Crystal Nucleation-Growth
Mechanisms for Machinable Glass Ceramic
X.P. Ma, G.X. Li, J.F. Yang and Z.H. Jin ................... 929
Preparation of Si-B-C System Powder Using Silicon, Boron,
and Boron Carbide
G.C. Hwang, J. Matsushita and J.J. Lee ..................... 933
Dependence of the Dielectric Properties of Pt/ZrO2/Si
Capacitors Prepared by RF-Magnetron Sputtering on the Oxygen
Partial Pressure and the Annealing Temperature
C.M. Lee, A. Park, S.Y. Park and M.W. Park ................. 937
Fabrication of n-HA/CS Porous Scaffold Carrying Ampicillin-
Loaded Microspheres
P.J. Shi, Y.B. Li, L. Zhang, Y. Zuo, M. Wu and H.N. Wang ... 941
E. Energy Conversion Related Materials
A Study on the Electrochemical Properties of PEO-Carbon
Composite Polymer Electrolytes for Lithium/Sulfur Battery
Y.J. Choi, S.H. Kim, S.C. Park, D.H. Shin, D.H. Kim and
K.W. Kim ................................................... 945
Characteristics of Fluorine-Doped Tin Oxide Thin Films on
Poly Ethylene Terephthalate (PET) Substrate
Y.H. Kook, J.H. Park, D.J. Byun and J.K. Lee ............... 949
Cu/GDC Cermet Anodes by Sintering via Surface Modification
with MgO Sol
K.R. Han, Y.J. Jeong, C.S. Kim and H.W. Lee ................ 953
Cycling Performance of LiFeP04 as the Cathode Materials for
Lithium Polymer Batteries
H.B. Gu and D.K. Jun ....................................... 957
Densification and Dielectric Properties of Glass/Ceramic
Composites Sintered with Various Borosilicate Glass
S.O. Yoon, K.S. Kim, S. Kim, S.H. Shim and J.G. Park ....... 961
Design of Manufacturing Process of Oxygen-Free High
Conductivity Copper Using Mahalanobis-Distance Outlier
Detection Method
J.I. Lee, J.H. Lee, S.H. Park, H.S. Choi, H. Cho,
H.H. Jo, S.K. Kim, H.C. Kwon and J.E. Hong ................. 965
Development of Honeycomb-Type Solid Oxide Fuel Cell
Consisting of LaGaO3 Electrolyte
H. Zhong, H. Matsumoto, T. Ishihara and A. Toriyama ........ 969
Effect of Metal Additives (Co and Ni) on the Electrochemical
Properties of Lithium/FeS2 Batteries
J.W. Choi, G. Cheruvally, J.H. Ahn, K.W. Kim and H.J. Ahn .. 973
Electrically Conducting Silk Fibroin Microspheres by
Incorporation of Multiwalled Carbon Nanotubes on their
Surfaces
S.H. Yoon, M.S. Kang, H.S. Kim and H.J. Jin ................ 977
Electrochemical Influence of Collagen Piezoelectric Effect
in Bone Healing
K. Noris-Suárez, J. Lira-Olivares, A.M. Ferreira,
A. Graterol, J.L. Feijoo and S.W. Lee ...................... 981
Electrochemical Properties of Perovskite Cathode for Solid
Oxide Fuel Cell
G. Hiramatsu, Y. Hirata, S. Sameshima and N. Matsunaga ..... 985
Evaluation on Some Metallic Alloys for SOFC Interconnect
C.L. Chu, J.Y. Wang, J. Lee, R.Y. Lee and S. Lee ........... 989
Experimental Study on the Effects of the Performance of
Polymer Electrolyte Membrane Fuel Cell
H.G. Kim, L.K. Kwac, S.S. Kang and Y.W. Kang ............... 993
Influence of Hydrogen Sulfide in Fuel on Electric Power of
Solid Oxide Fuel Cell
M. Nagamori, Y. Hirata and S. Sameshima .................... 997
In Situ Gold Nanoparticle Generation Using a Small-Sized
Ceramic Heater with a Local Heating Area
J.H. Jung, H.C. Oh, J.H. Ji and S.S. Kim .................. 1001
Intermediate Temperature Steam Electrolysis Using Doped
Lanthanum Gallate Solid Electrolyte (2) Effects of CeO2
Interlayer on Activity
N. Jirathiwathanakul, H. Matsumoto and T. Ishihara ........ 1005
Modeling of Electrochemical-Mechanical Deformations of
Ionic Polymer Metal Composite
S.S. Kang and Y. Toi ...................................... 1009
Nano Composite Membranes of Sulfonated Poly
(Ether Ketone)/ Poly (Ether Sulfone) Copolymer and SiO2 for
Fuel Cell Application
H.S. Park, D.H. Suh, D.H. Lee and W.G. Kim ................ 1013
Nanoporous Titania by Embossing with PMMA Nanopoles Made
from Nanoporous Alumina Template
H.J. Her, J.M. Kim, Y.S. Lim, J.W. Kim, Y.J. Choi,
C.J. Kang and Y.S. Kim .................................... 1017
Novel Pt-Tm/Carbon Nanocomposite for the Catalyst of Direct
Methanol Fuel Cell
S.M. Lee and J.H. Chung ................................... 1021
Observation of Effective Micro-Organisms Attached on Porous
Ceramics
D.S. Seo, Y.K. Kim, l.O. Hwang, Y.B. Park and J.K. Lee .... 1025
Preparation and Characterization of High-Power Anode
Materials Using Soft Carbon Precursors for Lithium Ion
Battery
T.R. Kim, J.N. Lee, Y.S. Lim and M.S. Kim ................. 1029
Preparation of High Lithium-Ion Conductive Ceramic
K. Oda, S. Takase and Y. Shimizu .......................... 1033
Properties of Coating Films Synthesized from Colloidal
Silica and Methyltrimethoxysilane
H.Y. Park, M.K. Na, S.Y. Yoon and S.S. Park ............... 1037
Properties of Sol-Gel Coating Film Synthesized from Nano
Boehmite and Methyltrimethoxysilane
I.H. Myung, M.S. Ahn and D.P. Kang ........................ 1041
Recovery of Nickel from Anode Materials of Spent Ni-MH
Batteries and its Catalytic Property for CH4 Dry Reforming
R. Hayashi, M. Matsuda and M. Miyake ...................... 1045
Solvent Effect on Ion Hopping of Solid Polymer Electrolyte
Y.J. Lee, Y.K. Jo, H. Park, H.H. Chun and N.J. Jo ......... 1049
Strengthening of Water Glass Based Aerogel by TEOS
H.J. Hwang, C.E. Kim and Y.C. Cha ......................... 1053
Structural and Electrochemical Properties of a Si/C/Cu Film
Anode Electrode
G.B. Cho, M.G. Song, W.C. Sin, Т.Н. Nam and K.W. Kim ...... 1057
Study on the Electrical Properties of Direct-Patternable
SBT Films Formed by Photochemical Metal-Organic Deposition
H.H. Park, H.H. Park, H.J. Chang and H.T. Jeon ............ 1061
Synthesis and Characterization of Multi-Sulfonated
Poly(Aryl Ether Ketone)s Proton Exchange 2) Membranes
D.H. Lee, H.S. Park, D.W. Seo, T.W. Hong and W.G. Kim ..... 1065
Synthesis and Sintering of La0.8Sr0.2Cr)3 for the Separator
of SOFC
S.I. Hwang, K.S. Yoo, S.H. Kim, C.S. Kim and S.W. Kim ..... 1069
The Discharge Properties of Nickel Sulfide Thin Film
Prepared from Sulfidation of Nickel Foil
J.S. Kim, G.W. Lee, K.W. Kim, J.H. Ahn, G.B. Cho,
H.S. Ryu and H.J. Ann ..................................... 1073
The Effects of Oxygen Partial Pressure on Interface States
and Ferroelectric Properties of In PZT/PbO/Si (MFIS)
Structures
C.H. Park, M.S. Won and Y.G. Son .......................... 1077
Electrochemical and Optical Properties of WO3 Prepared by
Sol-Gel Coating
C.Y. Kim, S.G. Cho, S. Park, T.Y. Lim and D.K. Choi ....... 1081
Author Index ................................................. 1085
Keyword Index ................................................ 1093
|
